Skip to main content

How to Fix Clogged Holes in Showerheads?

Is your showerhead leaking? Mineral deposits can buildup in your showerheads. This might be the reason why your showerhead is leaking.

Have you cleaned your shower head lately? If not, then minerals can build up into the holes of your shower head. It can cause your shower to drip. The dripping might be intermittent and you might be thinking it is just a small amount of water. You are wrong.

Over time, the small drips when measured can reach gallons of water. This can add up to your water bill. If this happens for months, it will cost you more than the cost of the repair.

To avoid this small problem to turn into a nightmare, clean your shower at least once every month. It will help prevent mineral buildup that can cause leaks.

If you are not sure whether the cause of your showerhead leak is the clogged hole and your shower has been up for years, it might be the time to purchase a new one. A plumber in Denver, CO offers repairs and new plumbing fixture installations.

If you want to try to fix clogged holes in showerheads on your own, below are the simple details:

The showerhead is connected to a water supply. Before doing any cleaning and fixes, turn off the water supply first. This is to avoid getting drenched. It is better to work on it when you are dry. You can find the switch valve under the basement or near the bathroom.

Once the water supply is off, start the process by detaching the showerhead. Unfasten the faceplate in the showerhead. This has to be cleaned by dousing and rinsing to remove buildup from the holes.

To remove the faceplate, check for screws in the showerhead. It is either you can remove the screws or just rotate the faceplate.

Depending on the size of your showerhead, prepare a bowl or a basin larger than your showerhead. Create a solution of salt and white vinegar. The solution should be able to submerge the entire showerhead. So, if you have a bigger showerhead add more vinegar and salt.

Keep your showerhead submerged in the solution for 8 hours. I advise you to do this at night before bedtime, this way you will not be using your shower until 8 hours. The solution will dissolve the mineral buildup in the showerhead.

After 8 hours, use a brush to bush the showerhead. You can also use a toothpick and insert it into every hole of the showerhead to remove clogs.

After the entire process, wash your showerhead thoroughly and reattach everything. Now, turn on the water supply and have a shower. If your problem is fixed, then you did a great job. If not, call for help from the experts.

Comments

Popular posts from this blog

Appliance Installations That Require a Plumber

We all, at some point, need to purchase appliances. It is either when we move into a new house or need to replace our old existing appliances. Appliances like televisions, amplifiers, speakers, and many others do not require the help of a plumber. You can always install it on your own to the location you want it. You can mount it in walls or put them on tables. However, there are appliances that need a professional hand to have it installed properly and safely. These appliances include gas stoves and gas lines, dishwashers, ice makers, and gas dryers. They may look simple, but one wrong move can create damage to your property and to the appliance itself, and the worst is an accident that may occur. Gas Stoves and Gas Lines If you want to have a gas stove but you don't have a gas line, it is time to contact a reputable professional like the plumber in Prairie Village, KS . They can route a gas line for your gas stove safely. It is important to keep in mind the quality of the...

What Are Sump Pumps?

A sump pump is an essential plumbing device employed to eliminate water pooled in a sump basin, most often located in residential homes' basements. This type of pump removes dissolved solids and the accumulated water, leaving a safe water level for you and your family to use. The pump draws the water from your home's basement by pumping it to a sump pit. This device can be either submersible in the water itself or hidden away from view. Sump pumps are also called "sink pumps." They move water from a lower region to a higher one, usually with the help of gravity. This type of pump can be either submersible or hidden away from view, depending on its preferred location. These devices have become increasingly popular because they can prevent flooding and other related damage to basements. Below are some basic facts regarding this useful plumbing device. How Sump Pumps Work: The principle of operation is simple. Water enters the lower hole of a sump basin through a mainten...

Problems AC Preventative Maintenance Can Prevent

It is called preventative maintenance for a very important reason; it prevents any breakdowns from happening. Here are the things preventative maintenance can prevent: Electrical Issues With preventative maintenance, a technician will inspect all the electrical wirings and connections. It finds any loose connection and fixes it. It also fixes worn wires before it could cause power loss. Low Refrigerant Charge The substance responsible for removing the humidity and heat from your space is called refrigerant. Through the time, refrigerant could leak when there are holes and cracks on the line. It can lessen the cooling power of your system. As part of the maintenance, the lines are checked and the refrigerant charge is tested. If there is any problem, the technician can fix it right away. Dirty Coils There are two coils in AC, the evaporator coils and the condenser coils. The evaporator coils function to remove heat from the inside while the condenser coils release the hea...